Oil Rotary Vacuum Pump

• - Displacement speed(60Hz) : 830~2200ℓ/min
• - Ultimate Pressure : 5 x 10-4 Torr

MS Series pump is oil rotary vacuum pump.
This structure of MS oil rotary vacuum pump series consist
of pump body, Backflow prevention valve for pump
protection,
including pump housing, rotor being eccentric in cylinder
motor oil case, vane, Exhaust valve and parts related to it
Structure and operation principle of MS series vacuum
pump operating is rotation type.
At this time, the rotor has the eccentricity and the cylinder
at the pump so that makes suction and exhaustion in order.
As the rotor rotates, two vanes mounted at rotor slides and
turns at internal cylinder by centrifugal force and oil
pressure.
The gas filtered through the dirt trap. at suction port flows
into the pump cylinder.
As vanes rotating and slide near the intake aperture, the
gas is confined between two vanes, then the gas turns and
moves to exhaust valve. Passing exhaust valve is
discharged through the exhaust port.

• •오일역류 방지 밸브 장착
  펌프가 작동중에 예상치 못한 정전이나 모터 고장으로 갑자기 멈추었다가 재가동시
  펌프내의 오염으로 부터 진공설비를 완벽하게 보호하여 내구성을 좋게 하였다.
  •Oil Backflow prevention valve
  When the pump is suddenly stopped by a power failure or motor failure
  not unexpected during operation And restart From contamination inside
  the pump to fully protect the vacuum system has good durability.
  
  
  •ISO 규격의 Motor Flange 적용
  ISO 플랜지의 규격 모터를 사용하여 어느 곳에서나 그리고 누구나 모터 교체가 용이
  하도록 하였다.
  •ISO standards application(Motor Flange)
  According to using ISO standards motor application, anyone can shift
  and change the motor easily at anyplace and anytime.
  
  
  •ISO 규격의 흡입구 배기구 적용
  ISO 국제 규격에 맞는 "Quick Clamp"를 사용하여 짧은 시간내에 진공설비와 펌프를
  쉽게 장착 및 분리 할수있도록 하였다.
  •ISO standards application(Intake and Exhaust Ports)
  These pump us the standard ISO KF(quick clamp)fitting on both intake
  and exhaust ports th allow for quick connection and disconnection to
  vacuum system.
  
  
  •MS Series는 소음이 매우적다.
  이상적인 구조를 기반으로 설계하여 가동시에 발생되는 소음을 감소하였다.
  •MS Series, Small noise
  Ideally designed, we realized very small noise
  
  
  •취급이 간편하고 커플링측 점검이 용이하다.
  펌프측면에 커버를 설치하여 누구나 쉽게 커플링 측을 점검할수 있도록 하였다.
  •Handling is simple and easy to check coupling side.
  Install the cover on the pump side were anyone can easily check the
  coupling side.
  
  
  •오일 씰 교환이 용이하다.
  축(Shaft) 누유(leakage)에 대한 신뢰도가 높으며 점검이 용이하다.
  •The replacement about oil seal is easy.
  The trust of the shaft leakage is high, it is easy to check.