• 홈아이콘
  • HOME
  • 제품소개
  • Vacuum Gauge

Vacuum Gauge

제품사진
  • product_p 버튼
  • Wide Range Diaphragm Manometer
  • product_n 버튼
Wide Range Diaphragm Manometer

Wide Range Diaphragm Manometer Detail

  • 메뉴얼다운로드
  • 파트리스트 다운로드
  • 리스트
  • - Displacement speed(60Hz) :
  • - Ultimate Pressure :

  • Wide Range Diaphragm Manometer vacuum gauge(P/N902074)
    Model : P/N902074

    Wide Range : 10-3 to 1500 Torr
    Available in .001 to 2000 mbar & 0.1 to 200 kPa
    Linear with Any Gas from 2 to 1500Torr
    Up to 4 Adjustable Set Points and 3 Amp Relays
    0 to 2 VDC, 0 to 10 VDC, and 4 to 20 mA Outputs
    Linear Analog Outputs for Computer Interface
    Large Easy to Read Green LED Display
    Stainless Steel or Silicon Diaphragms Available
    Bench or Panel Mount Enclosure
    400 mSec. Response Time From 2 to 1500Torr
    1.25 Sec. Response Time From 1 to 2000mTorr
    All Cables and Mounting Hardware Included
    Extension Cables up to 250 Feet

    Fast Response
    The Wide Range Manometer uses a fast response diaphragm sensor to provide high accuracy measurements that are unaffected by gas composition from 2 1500 Torr. At pressures form 2000 mTorr to one mTorr the easy to read green LED display in driven by a rugged Pirani sensor that is mounted in the transducer next to the Diaphragm sensor. The Diaphragm and Pirani sensors are both mounted in the same transducer body, and the diaphragm sensor is easily replaceable in the field.

    Unaffected By Sensor Orientation.
    This durable process cont기 instrument uses a transducer body machined from a solid block of stainless steel and, unlike convection gauges, our wide range gauge accuracy is not affected by the transducer orientation or gas composition.

    Four Set Points for Process Control
    The Standard Wide Range Manometer includes 2 adjustable set points, while the optional version provides 4 adjustable set points for process control. These process cont기 set points have front panel LED indicators and can be set anywhere in the range of he instrument. Each Set Point drives its own SPDT relay.
    Contacts are rated 3 amps@220v, non-inductive.

    0 to 10 VDC and 4 to 20 mA Outputs.
    The standard instrument provides 0 to 2 VDC and O to 1.5 VDC outputs.
    In addition to these standard outputs, the optional version provides 2 programmable analog outputs of 0 to 10VDC or 4 to 20mA

    Torr, milliBar, Pascals
    Wide Range Manometer reads directly in Torr and mTorr, but ranges of .001 to 2000 millibar and 0.100 Pascals to 200 kiloPascals are available at no extra charges.